Strenx® 700MC D/E: mechanical properties and bending
Thickness groups, tensile strength and minimum internal bend radius for 700MC D/E.
Sources checked:Understand the Material
Strenx 700MC D/E is hot-rolled high-strength structural steel for cold forming. The table applies to the SSAB product. Mechanical tests are longitudinal; above 8 mm, minimum yield strength may be 20 MPa lower.
A80 applies only for t < 3 mm and A5 for t ≥ 3 mm. In the bend radius, t is sheet thickness. Check the impact requirements for D and E separately. Do not transfer this table to 700MC Plus or other Strenx products.
Technical Properties
| Thickness | Minimum yield / tensile strength (MPa) / 90° internal radius |
|---|---|
| 2–3 mm | 700 / 750–950 / 0.8 × t |
| 3.01–6 mm | 700 / 750–950 / 1.2 × t |
| 6.01–10 mm | 700* / 750–950 / 1.6 × t |
| Thin-sheet A80, t < 3 mm | Minimum 10% |
| A5, t ≥ 3 mm | Minimum 12% |
| * t > 8 mm | Minimum yield strength may decrease by 20 MPa |
Applications & Selection Notes
Cold-bent high-strength structural components; tooling and welding procedures should follow manufacturer recommendations.
What Should You Include in Your Enquiry?
700MC D or E, thickness, bend orientation, impact requirements and welding requirements.
Send Your Technical Requirements →Manufacturer Sources
Verify table values against the current data sheet and certificate for the delivered material.