DC01: mechanical properties and chemical composition
A manufacturer example of EN 10130 DC01, with thin-sheet exceptions and composition limits.
Sources checked:Understand the Material
SSAB DC01 Zero is cold-rolled steel for forming that meets EN 10130 DC01 requirements. The values below are taken from its data sheet dated 7 October 2025; product and test conditions must be retained.
The maximum yield strength increases by 20 MPa for 0.5 mm < t ≤ 0.7 mm and by 40 MPa for t ≤ 0.5 mm. The 280 MPa upper limit is valid for 8 days from the manufacturer’s date of availability. Specimens are tested transverse to the rolling direction. Oiling does not provide permanent corrosion protection.
Technical Properties
| Property | SSAB DC01 Zero / source conditions |
|---|---|
| Base maximum yield strength | 280 MPa; thin-sheet exceptions explained above |
| Tensile Rm | 270–410 MPa |
| Elongation A80 | Minimum 28%; subject to data-sheet conditions |
| C / Mn, maximum | 0.12% / 0.60% |
| P / S, maximum | 0.045% / 0.045% |
| Dimensional range | 0.40–3.00 mm; maximum width 1,530 mm |
Applications & Selection Notes
General pressing and forming; deep drawing may require a grade with greater formability.
What Should You Include in Your Enquiry?
Grade, thickness, surface, oiling, dimensional tolerances and test conditions on the certificate.
Send Your Technical Requirements →Manufacturer Sources
Verify table values against the current data sheet and certificate for the delivered material.